Skip to content
Clipwright
Menu
Fog bank: a frame from a film that uses it.
EffectNew

Fog bank

Low fog rolling over the ground and the water: soft drifting patches hugging the surface, and a thicker town haze that follows a 0 to 1 density.

Version
1.0.0
Added
23 October 2026
Films
Not used in a film yet

Parameters

NameTypeDefaultRangeWhat it does
density (Can change over time)number0.50 to 1how thick the fog is: 0 clear, 0.3 mist, 0.6 fog, 1 dense; also sets the town's hazeCan change over time
height (Can change over time)number81 to 60 mhow deep the layer lies over the ground or water; most of it is in the lowest thirdCan change over time
drift (Can change over time)number10 to 10 m/show fast the fog rolls along: 0.5 is still dawn air, 3 a fresh sea breezeCan change over time
driftTowardnumber300 to 360 degcompass bearing the fog rolls toward: 30 inland off the sea, 210 out to sea
puffSizenumber72 to 16 mhow wide each soft patch is; bigger reads as smooth banks, smaller as wisps
patchesinteger8020 to 110how many patches are drawn at full density; fewer patches show as separate wisps
tintcolor#d6dbe0–the colour of the fog
strength (Can change over time)number10.1 to 1.5how opaque the patches are, apart from the haze; 1 is a soft veilCan change over time
cameravec23, -18-600 to 600where the camera stands [along, inland] metres; the fog gathers ahead of it
facingnumber200 to 360 degcompass bearing the camera faces: 20 is the street looking at home, 210 out to sea
reachnumber14060 to 400 mhow far out the fog bank stands; the white wall sits at the far end, so set it to the distance fog should hide
level (Can change over time)number0-20 to 60 mheight of the ground or water the fog lies on over today's sea; follow the sea as it risesCan change over time
hazeRaisenumber0.60 to 2how far the density thickens the town's air, once at a shot's start; 0 leaves the haze alone
seedinteger50 to 99which random pattern the patches lie in
seaMistnumber0.50 to 1how much of the density the town's own mist over open water follows; 0 leaves the sea clear

Use it in a film

film.js
elements: { 'fog-bank': { density: 0.5, height: 8 } }

Use it from your agent

Ask your agent to put it in a film. It finds the element by name.