Skip to content
Clipwright
Menu
Wooden shipwreck: a frame from a film that uses it.
ModelNew

Wooden shipwreck

The ribs of an old wooden sailing hull standing out of the sea floor: broken keel, frames, a few planks, a mast stump, listing, weed on the lower timbers.

Version
1.0.0
Added
23 October 2026
Films
Not used in a film yet

Parameters

NameTypeDefaultRangeWhat it does
lengthnumber2820 to 40 mthe hull's length from stem to sternpost
beamRationumber0.270.22 to 0.34the hull's greatest width as a share of its length
buriednumber0.140 to 0.9how much of the hull's depth is sunk in the sea floor: 0 sits on it, 0.9 leaves only the top
listnumber50 to 30 deghow far the wreck lies over on its side
trimnumber1.5-8 to 8 degbow up (positive) or bow down (negative)
framesinteger108 to 22how many pairs of ribs (frames) are along the hull
planksnumber0.60 to 1how much of the planking still clings to the frames
growthnumber0.50 to 1how far up the timbers weed and growth stain them
stemnumber0.750.2 to 1how much of the bow's stem post is left standing
mastbooltrue–a splintered stump of the mainmast
sandBanksbooltrue–sand heaped against the bow and stern
variantinteger80 to 99changes which ribs are broken, which planks remain and the sand
timbercolor#6a5a48–the dark weathered ribs and keel; a channel's seed turns the hue
plankingcolor#8a7a62–the planks that remain
weedcolor#5b6a3e–weed and growth on the lower timbers
sandcolor#b8a67f–the sand heaped against the hull

Use it in a film

film.js
world: { props: { prop: { model: 'shipwreck', at: [6, -4] } } }

Use it from your agent

Ask your agent to put it in a film. It finds the element by name.