Skip to content
Clipwright
Menu
Tide gauge station: a frame from a film that uses it.
ModelNew

Tide gauge station

A tide station on piles over the water: an instrument hut, a stilling-well pipe running down to the floor, a solar panel, an antenna mast and a radar sensor.

Version
1.0.0
Added
23 October 2026
Films
Not used in a film yet

Parameters

NameTypeDefaultRangeWhat it does
pileHeightnumber4.51.5 to 12 mhow high the deck stands over the floor the piles are set in (z = 0)
decknumber32.2 to 4.5 mthe width of the square deck
mastHeightnumber2.41 to 4 mhow tall the antenna mast stands over the deck
pileschoicetimbertimber, steelthe piles: square timber or round steel pipe
bracingbooltrue–X-bracing between the piles, when they are tall
railingbooltrue–a railing around the deck
ladderbooltrue–a ladder down the left side of the deck
solarbooltrue–a solar panel on the roof, tilted toward the sea
beaconbooltrue–a small light on the mast top, lit with the town's lamps
hutColourcolor#e4e1d6–the instrument hut's walls; a channel's seed turns the hue
roofColourcolor#8a3b32–the hut's roof; a channel's seed turns the hue
structurecolor#6a5b4b–the piles, bracing, deck and door
pipeColourcolor#cfd3d0–the stilling-well pipe and the sensor
metalcolor#5d646b–the railing, ladder, clamps and mast
panelColourcolor#1f3a63–the solar panel
lampColourcolor#ffd27a–the beacon's light

Use it in a film

film.js
world: { props: { prop: { model: 'tide-gauge', at: [6, -4] } } }

Sources

Use it from your agent

Ask your agent to put it in a film. It finds the element by name.