Skip to content
Clipwright
Menu
Wind turbine, three blades: a frame from a film that uses it.
ModelNew

Wind turbine, three blades

A three-bladed horizontal-axis wind turbine on a tapering tubular tower, with nacelle, spinner and twisted tapered blades; the rotor angle and yaw can be set.

Version
1.0.0
Added
23 October 2026
Films
Not used in a film yet

Parameters

NameTypeDefaultRangeWhat it does
hubHeightnumber3625 to 50 mheight of the hub (the rotor's centre) above the ground
rotorDiameternumber4020 to 54 mdiameter of the rotor; shortened if the blade tip would pass 59 m or come within 4 m of the ground
rotornumber200 to 120 degangle of the blades about the hub, clockwise from the front; 0 puts one straight up, 120 repeats it
yawnumber0-180 to 180 deghow far the nacelle and rotor are turned about the tower; 0 faces the rotor toward the front
towerBasenumber3.22 to 4.5 mdiameter of the tower at its foot; the top is about 0.6 of it
nacelleShapechoiceroundedrounded, boxythe nacelle's cross-section: an oval, or a rounded box
tipBandsbooltrue–paint the outer 12 percent of each blade in the accent colour
lightbooltrue–a small aviation light on the nacelle's roof that shines with the town's lamps
towercolor#e9ebea–the tower's paint
nacellecolor#dfe3e4–the nacelle housing
bladescolor#f3f4f2–the blades
accentcolor#d9482b–tower foot band, spinner and blade tips; a channel's seed turns its hue
trimcolor#3b4247–flange, door and the ring where the nacelle turns
lightColourcolor#ff3b30–the nacelle light

Use it in a film

film.js
world: { props: { prop: { model: 'wind-turbine', at: [6, -4] } } }

Use it from your agent

Ask your agent to put it in a film. It finds the element by name.